2014-2016 Mazda 6 Custom RGBW Headlights

Exploring your options

Aftermarket Housing Assemblies: If your car came stock with halogen headlights, we are able to provide aftermarket OE LED Replica headlights. These add the led drl’s however come with an H7 Halogen projector, which is not the greatest in terms of output. We offer the option to swap the projector to our NHK Pro Plus Bi-LED Projector, which retains the plug & play aspect, but significantly upgrades your output, typically from a measured 200 lux up to 1800 lux. Otherwise, you can keep the stock projector, and add an H7 HID bulb with a 35w Ballast.

Low/High Beam Options: We offer a variety of “All-in-one” Bi-LED projectors, which is more than just a bulb swap. Due to size constraints, we recommend the NHK Pro Plus Bi-LED Projector, the NHK M4, NHK M5 or Dragon Series include large heat-sinks with integrated cooling fans to provide a long lifespan. While oem projectors aren’t bad, (the aftermarket halogen aren’t good), the Bi-LED offerings are another level, not to mention no external wiring, everything is hardwired and self-contained. Adding a second Bi-LED projector gives you to option to have quad low & high beam outputs, but you will have 2 separate cut off heights due to the fact that the original high beam projector is 1″ lower within the housing. Alternatively, it can be hooked up as just a high beam projector. These options can be discussed at the time of building.

Industry Leading Blueghozt Controller: Many Retrofitters are able to reduce the cost of their builds by using cheaper parts such as an sp105e or sp110e controller, GTA Retrofits does not. We do sell the sp105e controller on our website for those getting their toes wet in the world of custom headlight retrofitting, but on orders we build, we keep the bar high and stick with the Ghost Lighting Blueghozt Lite controller. We take it a step further and hand solder all connections and then fully waterproof (pot) the controller. Each connection is also provided with glue-lined heat-shrink to prevent water intrusion and corrosion. Your DRL & turn signal functions are hardwired into the controller providing automatic lighting for daily driving. Show modes are controlled from the users phone, and if desired, can override your DRL’s. The controller features 8+ Startup/Shutdown animations, multiple different turn signal animations, and for each show mode, the user is able to edit the selected colours, speed, and frequency.

Low Voltage Shut Off: Due to the parasitic nature of ALL addressable (Chasing) LED’s, if your car is not a daily driver, you could find yourself with a dead battery sooner or later. A 24″ length of leds will draw approx 200 mA even when not in use, therefor we provide you the option to automatically disconnect your controller from your car battery, and as soon as you start your car back up, your headlights will start right back up. Should you change your mind later, it’s a simple as disconnecting the low-voltage controller and removing it.

Custom DRL LEDs: Our signature modification, we completely remove the low powered leds and replace with a a 144/m led strip, hand soldered to fit behind the stock diffuser. 12V vs 5V; The GT RGBW Rigid UCS2904 Chasing Strip uses a semi-rigid chip board with the UCS2904 control chip mounted on the back which helps isolate it from heat, which helps to extends product lifespan, all while being brighter. The 5V GT RGBW Chasing Strip uses a flexible ribbon, but flexibility is not a necessity here, which is why we would only select 5V if you require halos in your build, which are only available in 5V sk6812rgbw chips.

RGB Demon Eyes: Our GT RGB Demon Eyes are a subtle but unique touch for your headlights (often paired with projector lens etching), and can be controlled via your phone. We have solid RGB(w) options which have stand alone control from your Chasing DRL’s, or we offer the ability the integrate your demon eye into your show modes, which is cheaper, but does not offer flexibility in usage (see GT Addressable RGBW Demon Eyes).

Projector Lens Etching: The final touch, whether you choose the classic honeycomb etching, a Sharingan, a business name, or literally any other pattern or logo, a projector lens etching sets you apart, typically (but not automatically) paired with a Bluetooth Controlled GT RGB Demon Eye.