Audi S5/A5 B8.5 RGB DRL Kit (2012-2016)

Bluetooth Controlled RGB DRL Kit

Includes:

• RGBW DRL Boards
• DRL Driver

Notes: Installation is more straightforward than the included instructions suggest, as there is no need to disable the vehicle’s daytime running lights (DRLs) through the car’s settings. Instead, apply 12V to pin 10 of the connector and install a load resistor between pin 10 and ground on the opposite-side connector. Afterward, the factory LED can be disconnected.

There are two minor drawbacks to be aware of. The light output remains the same brightness during both daytime and nighttime operation, with no dimming function. Additionally, a brief yellow flash may occur during startup when the controller first receives power.

Addons

Bluetooth RGB Demon Eyes: Add a RGB demon eye to your projector (does not replace your OEM Low Beam), controlled via separate controller through your phone.

Projector Clear Lens: Increase your output by 10-15% with a simple 4 screw projector lens swap. The oem projector lens has fresnal bumps used to soften the output, which it does well, but we want that output! A quick swap while you’re in there for easy light gains. We also offer custom projector lens etching services, whether the popular honeycomb style, or a custom design all your own.

Butyl Sealant: Every retrofit we perform gets either new sealant to ensure peace of mind, we recommend you do the same. Remove the old while still hot, and fill (but not over fill) your channels with the superior Diode Dynamics butyl, which cools stiffer, and provides more heat resistance and oem or any other brand.

Installation: Customers must open their headlights to preform the swap.