Bi-Xenon: Super H1 7.1 (Budget Kit)

Bi-Xenon: Super H1 7.1

Ready for a budget projector without a budget output? These Super H1 7.1 Bi-Xenon projectors are the choice for you. Stepping away from the 3x more expensive Morimoto 8.0, these won’t be hurting any wallets any time soon.

Installation: Bolted OR Threaded shaft. The 4 mounting holes on these projectors match the Morimoto 7.0 & 8.0 projectors perfectly. Any retrofit bracket you were going to use with those, you can use them with these. And yes, for those that were going to install using a threaded shaft into your halogen reflector, these have that too.

Bi-xenon: These will function as your high and low beam, however, unlike other projectors, they have a male molex plug. So if you’re planning on plugging into a bi-xenon harness (h4, h13, etc), or into your oem 9005/9006/9012 high beam bulb, you’re going to need a pair of these: https://gtaretrofits.com/shop/hid/accessories/molex-9006-adapters/  or you can simply cut off the connectors and hard wire it.

Direct: These projectors are factory-direct and do not receive the same level of QC that we’ve come to expect from other brands like Morimoto. However, the ACME Super H1s got a good track record for little to no problems out of the box, and their pre-installed clear lens should give them a nice sharp and colorful cutoff line and good output.

WHAT’S INCLUDED

• PROJECTORS: 2x Super H1 7.1 Projectors
• SHROUDS: 2x Your Preference
• BALLASTS: 2x G3 38W Ballast
• HID BULBS: 2x NHK H1
• WIRE HARNESS: 1x Your Preference
• WARRANTY: 1 Year (35w)
• OPTIONAL HOUSING SEALANT: 1x Morimoto RetroRubber