$195.00–$225.00Price range: $195.00 through $225.00
BLUEGHOZT HAS BEEN UPGRADED TO V2.0!
Features new reverse input, diagnostic LED, and board layout!
The Blueghozt Lite Smart LED Controller interfaces with iOS and Android devices via Bluetooth and is designed to work with WS2812b and SK6812(rgb/w) (Neoprism/Neopixel) RGB addressable LEDs.
These controllers are not waterproof and must be installed in a water-free environment. For more pictures & videos of our RGBWA Chasing Strips, visit our Instagram: www.instagram.com/gtaretrofits
Please see our Blueghozt Controller set up guide at the bottom of the page.
Placeholder Blueghozt Lite Image, you’ll receive a PLUS.
The Blueghozt PLUS Smart LED Controller is far easier to install compared to the original Ghozt modules. Connectors are included which plug and play with many off-the-shelf addressable RGB LED kits. Screw terminals are included on the board for solder-less connections. The Blueghozt PLUS adds 4 +12V power switches for controlling 12v accessories
Blueghozt 2.0 has FIVE(5) 12v inputs, for a left turn, right turn, park, brake, and reverse! (1.0 is missing Reverse)
Four 12v outputs for controlling 12v accessories (PLUS only)
Controls two chains of addressable LEDs up to 425 each! (350 for RGBW)
Fully configurable through Bluetooth with our iOS/Android app!
New features are delivered over the air through our app updates!
Sequential turn signals
F1-style braking
Parking/running lights animations
Reverse lights control
Showmodes triggered via Bluetooth or EXT input
One module can control both driver/passenger side turn signals!
Unlimited fully customizable showmodes can be saved with our app
Automatically adjustable turn signal timing to car’s flasher unit
Very low power drain while in operation, sleep mode when idle
Small form factor!
Includes a protective plastic housing!
Minimal experience with retrofitting, soldering, and working with LEDs/resistors recommended. You’ll need to provide some extra wiring to reach your drl & turn signal wires, along with some wires to extend off the power converter for easier installation. Headlight/taillight in most cases must be opened to gain direct access to install LEDs. LEDs, headlights, and taillights are all sold separately.
Compatibility
5V or 12V versions of addressable LEDs.
WS2812b and SK6812(rgb/w) Chips
Blueghozt easily integrates with OEM functions such as parking lights, turn signals, and brake lights
Addons
Extension Wires: Use these extensions to make the installation & location of your controller MUCH easier. You won’t be limited to the length of the wire coming out of the headlight.
GT Inline Capacitors: In our attempts to improve reliability, we have found that voltage spikes do not play nicely with 5V LEDs. So we created our inline GT Inline Capacitors that also have a resistor on the data line to do everything we can to prevent voltage spikes in any form.
3oz Dielectric Grease: If you are using the supplied JST plug connections, they are susceptible to the elements and MUST be protected to ensure your warranty, this is one of the easiest ways to do so, along with heat shrink.
Wiring Kit: Use our wiring kit for an easy way to get your Blueghozt up and running. Includes 2 x 1 meter & 1 x 2 meters of sheathed wiring for your turn signal & DRL inputs.
Reviews
There are no reviews yet