GT RGBW Chasing LED Chain (5v)
$95.00
Make your car a show stopper with these easy-to-use RGBWA Chasing LED Chain.
These are intended to be used with OEM/AFTERMARKET headlights that use multiple LEDs side-by-side for their DRL’s, as opposed to a single led lighting up an acrylic bar.
The chain can be shortened to any length, just don’t forget to adjust your controller’s settings.
For more pictures & videos of our RGBWA Chasing Strips, visit our Instagram: www.instagram.com/gtaretrofits
Please note that we’ve removed selecting your controllers from the halos product listing to make it easier for us to maintain. Controllers are still available for purchase https://gtaretrofits.com/led/accent-lighting/led-accessories-controllers/
Chain Length: 30 LEDs. Spaced 2″ apart.
Looking for USD pricing? Click the flag in our toolbar above!
GT RGBWA Chasing LED Chain
Controllers:
- Auto on DRL with 5+ selectable start up/shut down animations
- 5+ Turn signal styles with editable speeds and size
- 20+ Editable show modes
- Click here to read more about the Blueghozt controller.
The sp105e offer 4 Different Modes;
- Solid White parking light mode. This mode is triggered by a wire direct to the driver. Customers may attach this to an “Always on fuse”, a toggle switch, or any other light that they’d like the strip to turn on with (oem parking light wire). Parking Light mode overrides RGB & Show mode, so if you forget to turn off either before driving, it will automatically turn white.
- Switchback Turn Signals. The halos will flash amber with your oem turn signal. This overrides RGB, Show Mode & DRL Mode.
- Solid RGB. The downloadable IOS or Android App has “quick buttons” for solid RGB colours on the home screen.
- Show Mode. 200 Preprogrammed Show modes controlled via your phone.
Modes 1 & 2 Operate without any user input and will work regardless of Bluetooth connectivity (must still be connected to battery at all times). Modes 3 & 4 work directly from battery and will work regardless if vehicle is ON or OFF (However 1 & 2 will still override 3 & 4).
Why Capacitors? In our attempts to improve reliability, we have found that voltage spikes do not play nicely with 5V leds. So we created our inline GT Capacitors that also have a resistor on the data line to do everything we can to prevent voltage spikes in any form.
Dielectric Grease: Add this to all connections before you cover it in heat-shrink to prevent corrosion. A good connection is a happy connection is a happy customer.
Extension Wires: Use these extension wires to give yourself a little extra play room when installing your headlights, simply insert between your controller/driver and the wires exiting the headlights. Make sure you are coating the connections with dielectric grease to prevent corrosion and also taping them up.
Please Note
Addressable LEDs (the halos and strips themselves) have a small power drain even when off, regardless of the controller selected. If your car is driven daily, this should have no effect on you. If your car sits for a week+, consider installing a switch on the 12+ wire connecting to the battery (after the fuse).
Addressable LEDs are sensitive to temperature, especially, say, a 150+ degree bulb. If you’d like to get the longest life possible out of your purchase, consider running your halos/strips only has a drl and have them turn off when your low beam is on.
Included
- All chain kits are sold in pairs.
| Weight | .5 kg |
|---|---|
| Dimensions | 25 × 20 × 5 cm |
| Led Chain | 24" GT RGBWA Chasing Led Chain |
Installation Guide
- It is recommended these products are installed by a professional.
- GTA Retrofits assumes no liability for the installation of the product. Failure to install properly can lead to electrical damage or injury.
GTA Retrofits – sp105e Controller Guide
Warranty
- PLEASE READ OUR FULL WARRANTY,SHIPPING,FAQ PAGE HERE
- The product comes with a 1-year warranty.
- Customers may be required to return the product for it to be inspected before any refund or replacement is issued.
- The customer may be responsible for shipping (both ways)
- To begin the warranty process, respond to your order confirmation e-mail.
Warranty Exclusion
- Halos installed around halogen bulbs (EXAMPLE PIC) will NOT be warrantied. Halos MUST be installed in front of reflectors/projectors on the front bezel or shroud.
- Halo JST connections not protected with dielectric grease & heat shrink will corrode causing excess power draw. Corrosion will deny your warranty.
Reviews
Only logged in customers who have purchased this product may leave a review.
| Make | Model | Year |
|---|---|---|
| 1990 - 2030 |
Related Products
GTA Retrofits$90.00
👁 4 viewing
Diode Dynamics$35.00
Select options This product has multiple variants. The options may be chosen on the product page
Bavgruppe$590.00 – $600.00Price range: $590.00 through $600.00
Select options This product has multiple variants. The options may be chosen on the product page👁 6 viewing
LightExcel (verified owner) –
Fantastic product, makes life much easier rather than wiring up individual LEDs. Useful for specific use cases where you need to fill many individual LED spots.