NHK Dragon Series Bi-LED Projectors (LHD)

NHK® Dragon Series Black Dragon DRG02 – 3.0″ Round Lens Bi-LED Projector (Pair)

The NHK Black Dragon DRG02 is a next-generation Direct-Illuminating Bi-LED projector featuring a 3.0″ round glass lens and an enhanced high-output lighting platform. Designed for maximum brightness, long-distance projection, and precise beam control, the DRG02 builds on NHK’s advanced Dragon chassis with improved thermal efficiency and stronger low/high beam performance.

Bolt Pattern: Sharing the same bolt pattern as many projectors on the market such as the Morimoto D2S 5.0, NHK G5-R, and G5-X, the V Plus is ready to swap into action wherever you were going to use one of those projectors.

Wiring Installation: The NHK M4 Bi-LED is a “self-contained” unit, and comes with 4 bare wires. 2 for Low (RED+/BLACK-), 2 for High (WHITE+/BLUE-). You can hardwire these if your headlight has internal wiring, or purchase the 9006 pins & plugs add-on (1 or 2 pairs, your call), to have a 9006 plug that you can run out the headlight housing.

Connectors & Plugs: Add 9006 or H11 pins & plugs to your order. The NHK V Bi-LED Projectors come with bare-end leads for high & low beams. If you’d like the ability to change one (or both) pairs of wires into a plug for a relay harness, grab yourself a pair. Just snip off the side you won’t be using. Also ideal if you need a GT PWM Error Canceller.

Professional installation recommended for correct alignment, sealing, and wiring.

Frequently Asked Questions

Q: Will the NHK Black Dragon DRG02 fit my vehicle? A: The DRG02 uses a G5 bracket-hole pattern, which is compatible with most Hella G5 and 3R retrofit mounts. While it fits a wide range of vehicles, some housings may need custom brackets or spacers depending on your specific application. If you’re unsure about fitment for your year/make/model, reach out before ordering.

Q: Is the DRG02 street legal in Canada and the US? A: The DRG02 produces a left-hand-traffic beam pattern designed for North American roads, with a sharp horizontal cut-off that keeps light on the road without blinding oncoming drivers. As with any aftermarket lighting upgrade, verify your local provincial or state regulations to ensure compliance.

Q: Do I need a separate ballast or driver? A: No. The DRG02 has a 12V driver built directly into the projector unit — no external ballast, control module, or additional wiring is required.

Q: Will my car need to be programmed or recalibrated after installation? A: No coding or module programming is required. Once installed, the projectors will need to be properly aimed and sealed. Professional installation is strongly recommended to ensure correct beam alignment.

Q: How does the DRG02 compare to the DRG01? A: The DRG02 is the higher-spec version of the DRG01. It delivers more output, a wider beam spread, and stronger high-beam performance thanks to an upgraded LED platform and increased power draw.

Q: What warranty coverage comes with the DRG02? A: The NHK Black Dragon DRG02 includes a 1-year warranty covering manufacturer defects on the projector lens assembly.

Q: What is the output colour?: A: The NHK Dragon Series features a slightly warmer, less blue output than other models, closer to a 5500k.