BlueGhozt LITE Smart LED Controller

The Blueghozt Lite Smart LED Controller is far easier to install compared to the original Ghozt modules. Connectors are included which plug and play with many off-the-shelf addressable RGB LED kits. Screw terminals are included on the board for solder-less connections.

Features

Minimal experience with retrofitting, soldering, and working with LEDs/resistors recommended. You’ll need to provide some extra wiring to reach your drl & turn signal wires, along with some wires to extend off the power converter for easier installation. Headlight/taillight in most cases must be opened to gain direct access to install LEDs. LEDs, headlights, and taillights are all sold separately.

Compatibility

• 5V or 12V versions of addressable LEDs.
• WS2812b and SK6812(rgb/w) Chips
• Blueghozt easily integrates with OEM functions such as parking lights, turn signals, and brake lights

Addons

Extension Wires: Use these extensions to make the installation & location of your controller MUCH easier. You won’t be limited to the length of the wire coming out of the headlight.

GT Inline Capacitors: In our attempts to improve reliability, we have found that voltage spikes do not play nicely with 5V LEDs. So we created our inline GT Inline Capacitors that also have a resistor on the data line to do everything we can to prevent voltage spikes in any form.

3oz Dielectric Grease: If you are using the supplied JST plug connections, they are susceptible to the elements and MUST be protected to ensure your warranty, this is one of the easiest ways to do so, along with heat shrink.

Wiring Kit: Use our wiring kit for an easy way to get your Blueghozt up and running. Includes 2 x 1 meter & 1 x 2 meters of sheathed wiring for your turn signal & DRL inputs.

Blueghozt Controller setup