VLand D2H HID Kit Installation Guide

Don’t like pictures? Click here for a youtube video on how to do it.

Remove Cap & Rubber

Push wiring through. I recommend pushing the rubber all the way through, and then halfway back. It makes it easier.

Remove Bulb holder and place around the bulb. Making sure it seats properly around the nubs. It will be a little loose, so you’ll have to hold in place while inserting it.

Insert and twist to lock, ensuring it’s snug and the yellow return wire is at the bottom

Insert power wires, Blue to Green, White to Black. Your kit may come with Red/Black wires, in which case, Red to Green, Black to Black.

Put the cap back on and install it on the car. Add HID ballast or relay harness + ballast.